HILGE (brand of GEA) ADS 65/65/15/2

nhà sản xuất

HILGE (brand of GEA)

Quốc gia

Other

Mã sản phẩm

ADS 65/65/15/2

Mô tả

End suction stainless steel pump, Cr-Ni-Mo steel Description: GEA Hilge HYGIA II Adapta ADS 65/65/15/2 alternativ nachfolgend zu 98866242 Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Adapta-Bloc version with bearing bracket, with standard motor, with stainless steel shroud for motor Stainless steel shroud with GEA company logo Installation: on combi foot with machine pads Coupling: N-EUPEX B Painting colour: RAL 9005 Performance: Q = 40m3/H, H = 58 m Fls Medium: Bier / CIP Impeller(s): semi-open impeller 2309 Ø 220 Shaft seal: single mechanical seal hard carbon / stainless steel / EPDM Elastomers: EPDM Connections: Diameter DNE 65 Diameter DNA 65 Connection DNE: DIN 11851 Threaded Male Connection DNA: DIN 11851 Threaded Male Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 μm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 μm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 μm (product contacted part) Shroud: AISI 304 - 1.4301 Combi foot: AISI 304 - 1.4308 Bearing bracket/Lantern: cast iron - GG 20 Motor: three-phase motor with PTC thermistor Size: 160M Vendor: our choice Performance: 15 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B